ADDVANCE SWISSCUT 8372 USDA BIO-PREFERRED CNC Cutting Fluid Provides Reduced Cycle Time and a Better Finish

USDA Certified Biobased Product 54%ADDVANCE SWISSCUT 8372 is a USDA BIO-PREFERRED clear amber high performance, light viscosity, botanical cutting fluid designed for CNC Swiss Style machining. ADDVANCE SWISSCUT 8372 utilizes the latest technology for difficult machining applications without the use of clorinated paraffin.

ADDVANCE SWISSCUT 8372 is recommended for use on Stainless Steel, Hardened Steel, Titanium, Platinum, and Aircraft Aluminum.

ADDVANCE SWISSCUT 8372 provides exceptional tool life by withstanding and reducing friction at the cutting edge — increasing feeds and speeds, and providing long-term, trouble-free performance.

Success Stories on ADDVANCE SWISSCUT 8372

One customer machines 303 Stainless Steel on a Swiss style machine. They were looking for improved part finish and decreased cycle time. With their current cutting oils they were running at a feed rate of 0.0008 and a spindle speed of 1800 RPM.

Metalloid Botanical TechnologiesAfter switching to ADDVANCE SWISSCUT 8372, the operator noticed that the parts had a better finish. He then increased the feed rate to 0.0015 and the spindle speed to to 2000. The part still maintained the improved finish and the cycle time for the part was reduced from 8 minutes down to 4.5 minutes, nearly a 50% cycle time reduction! They also noticed thet the parts cleaned off more easily than in the past.

A second customer is machining a 4140 pre-hard material and was getting approximately 3,000 parts between tool changes with their current cutting oil. When they switched to ADDVANCE SWISSCUT 8372 they were able to get 25,000 parts run and they plan to keep running the same tooling on a new part!

These were huge successes and the customers are very happy with the performance of another one of Metalloid’s Bio-Preferred lubricants.

Benefits of ADDVANCE SWISSCUT 8372

  • Excellent finishes on both ferrous and non-ferrous metals
  • Does not use chlorinated paraffin
  • Stable at high temperatures
  • Pleasant odors
  • Environmentally friendly – non-toxic, non-corrosive, low isting product
  • Non-dye clear, amber fluid

ADDVANCE NEWS - Metalloid Corporation Product Feature

Gulf Antifreeze and Coolant Overview Chart

Find the Gulf Antifreeze & Coolant That’s Right For You

Gulf has an Antifreeze & Coolant for almost every type of vehicle and need, including products designed for diesel engines, off-road vehicles, stationary units, passenger cars and light-duty trucks, and other specific usages.

Enlarged Image: Gulf Antifreeze & Coolant Chart Enlarged Image.

Printer-Friendly PDF: Gulf Antifreeze & Coolant Chart Printer-Friendly PDF.

Enlarged Image: Gulf Antifreeze & Coolant Chart Enlarged Image.

Printer-Friendly PDF: Gulf Antifreeze & Coolant Chart Printer-Friendly PDF.

More Information

Visit Gulf Lubricants for more information about the line of Gulf Lubrication Technology products we supply, or contact us.

Gulf TRANSCREST® Synthetic CVT Fluid for Vehicles with Belt or Chain-Driven CVT’s

View Our Gulf Lubricants Product LineBurke Petroleum is pleased to announce the availability of Gulf Lubricants’ all new, full synthetic, Continuously Variable Transmission fluid (CVT). This product is designed to meet today’s most complex variable speed transmissions.

Gulf TRANSCREST® Synthetic CVT Fluid is recommended for use in most North American and Asian vehicles equipped with belt or chain-driven CVT’s.

Part Number: #332035

Available in bulk, drum, and pail quantities

Gulf Lubricants Automatic Transmission Fluids

Burke Petroleum carries the complete line of Gulf Lubricants transmission fluid, including:

  • Gulfpride® Synthetic Multi-Vehicle DEXRON VI: Low-viscosity, fuel efficient. GM licensed and approved, suitable in most foreign and domestic transmission applications.
     
  • Gulfpride® Synthetic Multi-Vehicle ATF: Full synthetic, excellent high and low temperature protection. Suitable for use in most of today’s high performance transmissions calling for MERCON® V, DEXRON®-IIIH, Chryslers ATF+4 and many other foreign and domestic transmissions.
     
  • Gulfpride®Universal ATF: Synthetic blend ATF suitable for a wide range of transmissions calling for: MERCON® V, DEXRON®-IIIH, Chrysler ATF 7176 +4, Toyota, and others.
     
  • Gulfpride®Multi-Purpose ATF: recommended for use in most automatic transmissions manufactured by General Motors and Ford for model years 2006 and prior calling for DEXRON-III and Mercon.
     
  • TRANSCREST® ATF, Type F: Original designed for Ford passenger car and light duty truck transmissions built prior to 1977, and many 1977 – 1980 models. Product can also be used in certain agricultural equipment specifying a John Deere J21A fluid.

More Information

Visit Gulf Lubricants for more information about the line of Gulf Lubrication Technology products we supply, or contact us.

Green Gun Oil from Metalloid Corporation is an AADVANCE in Environment-Concious Firearm Maintenance Products

American-made with bio-degradable, bio-renewable, and bio-sustainable ingredients!

 
ADDVANCE NEWS - Metalloid Corporation Product FeatureGreen Gun Oil is a breakthrough in the composition, benefits, and performance of firearm maintenance products. This revolutionary product employs “green chemistry” with natural ingredients to lubricate, clean, condition, and protect metal surfaces on firearms and other metallic sports equipment.

Green Gun Oil offers the environmentally conscious sportsman an alternative to messy petroleum based oils and solvents with odors that linger on your firearm. Green Gun Oil is formulated with regard to people and our environment.

Benefits

  • Lubricates – cleans – conditions – protects
  • Restores sheen to old and dull metal surfaces
  • Removes powder and metal fouling from bores
  • Protects firearms from humidity and corrosion in the field
  • Protects firearms during long-term indoor storage
  • Lubricates moving parts – safety, action, sights
  • Camouflaged odor does not alert game to sportsman’s presence
  • Effective inside or outside of firearm
  • Safe on all metals and alloys, including nickel- Not to be used on plastic or composites
  • Kind to the environment and to the sportsman user

Opportunities for Selling GREEN GUN OIL

  • Economical to use due to its low viscosity and high detergency properties
  • A little goes a long way!
  • The product can be used for lubrication and conditioning of:
    • Pistols
    • Shotguns
    • Long Rifles
    • Black Powder Firearms
    • Fishing Reels and Rods
    • Stone Knife Honing
    • Precision Instruments
    • Clock Gears
    • Other Mechanisms

METKLEEN 2140 Heavy-Duty Floor and All-Purpose Maintenance Cleaner Removes Toughest Oils, Greases and Shop Soils

METKLEEN 2140, from Metalloid Corporation, is a heavy-duty floor and all-purpose maintenance cleaner that is a favorite with many of our customers. It is an excellent choice to remove the toughest oils, greases and shop soils. METKLEEN 2140 is highly concentrated and is diluted with water at varying concentrations depending on the application and the soil being removed.

Many floor cleaners on the market are sold much more dilute than METKLEEN 2140, and can be offered at a lower pricing structure. In these cases, we can offer lighter versions of the 2140 that will compete in price while still outperforming the competitions product. Please contact us for information on these cleaners when the need arises.

Great For Many Industrial Uses

ADDVANCE NEWS - Metalloid Corporation Product Feature

  • Floor Scrubbers
  • Mop & Brush Cleaning
  • Spray Bottle Cleaning
  • Parts Cleaning
  • Tank and Sump Cleaning
  • Ultrasonic Cleaning

Benefits of METKLEEN 2140

  • Leaves Floors Clean & Dry
  • Hard Water Stable
  • Multifunctional— Clean & Deodorizes
  • Cleans well In Cold Water
  • Economical
  • Safe on Ferrous and Non-Ferrous Metals
  • Safe on Plastic, Glass, Ceramics and Linoleum
  • Removes Tire Tracks, Grease, Carbon, and other hard to remove Soils

Gulf Harmony AW Hydraulic Oils Provide Superior Wear Protection; Outstanding Oxidative and Thermal Stability

View Our Gulf Lubricants Product LineGulf Lubricants / Nu-Tier Brands has received several inquiries regarding the topic of hydraulic oil service life determination by ASTM D 943 and oil service life of Gulf Harmony AW Hydraulic Oils. In response to these questions Gulf Lubricants has issued the following statement.

The purpose of running an ASTM D943 Oxidation Stability Test is to measure the resistance of a lubricant to oxidation, especially those lubricants prone to contamination by heat and water, hence a measure of its potential service life. Basically, in the ASTM D943 Oxidation Test, oxygen is bubbled through a sample of oil and water in the presence of a copper-steel catalyst while maintaining the sample temperature at 203°F. The time it takes to increase the Total Acid Number (TAN) of the sample to 2.0 mg KOH/g is indicative of the oil’s relative “oxidation lifetime”. The results are reported in hours.

Gulf Harmony AW Oils are excellent antiwear hydraulic oils formulated with high-quality base oils and fortified with additives that provide superior wear protection and outstanding oxidative and thermal stability. These oils have been tested and shown to provide outstanding ASTM D943 long life stability, typically in the 5000 to 6000 hour range for the lower viscosity fluids.

As of this writing, Gulf Harmony AW 68 has demonstrated +4000 hours while the AW 22, 32, & 46 are at 5500 hours and still running strong. These excellent numbers are a direct result of premium, clean base stocks and a well proven additive system.

In summary, Gulf Lubricants is dedicated to manufacturing and supply of high quality lubricants that conform to the most modern industry standards. These durable antiwear hydraulic oils are recommended for and will satisfy performance requirements by North American and European pump manufacturers.

Antiwear (AW) Hydraulic Fluid

Click to Open
Product Bulletin
  Click to Open Material
Safety Data Sheet
334225 Gulf Harmony AW Hydraulic Fluid 22 MSDS
334227 Gulf Harmony AW Hydraulic Fluid 32 MSDS
334229 Gulf Harmony AW Hydraulic Fluid 46 MSDS
334231 Gulf Harmony AW Hydraulic Fluid 68 MSDS
334232 Gulf Harmony AW Hydraulic Fluid 100 MSDS
334233 Gulf Harmony AW Hydraulic Fluid 150 MSDS
334234 Gulf Harmony AW 220 LV MSDS

LS-2 Antiwear (AW) Hydraulic Fluid

Click to Open
Product Bulletin
  Click to Open Material
Safety Data Sheet
334533 Gulf Harmony Premium AW Hydraulic Fluid 32 MSDS
334546 Gulf Harmony Premium AW Hydraulic Fluid 46 MSDS
334568 Gulf Harmony Premium AW Hydraulic Fluid 68 MSDS

NZ (non-Zinc) Antiwear AW Hydraulic Fluid

Click to Open
Product Bulletin
  Click to Open Material
Safety Data Sheet
334228 Gulf Harmony NZ Hydraulic Fluid 32 MSDS
334230 Gulf Harmony NZ Hydraulic Fluid 46 MSDS
334241 Gulf Harmony NZ Hydraulic Fluid 68 MSDS
334243 Gulf Harmony NZ Hydraulic Fluid 100 MSDS

More Information

For more information about the line of Gulf Lubrication Technology products we supply, contact us.

GulfTEC® dexos1® Synthetic 0W-20 NOW IN QUARTS!

View Our Gulf Lubricants Product LineAfter having recently reported that the new GulfTEC dexos1™ Synthetic 0W-20 improves fuel economy and meets GM warranty requirements, Burke Petroleum is pleased to announce that this great new product is now available in quarts.

AVAILABLE IN 12×1 QUART CASES, DRUMS & BULK

We have available inventory of 12 x 1 quart cases, drums, and bulk, to meet all of your retail or fleet maintenance needs.

Gulf Lubricants’ line of synthetic motor oils with the addition of GulfTEC dexos 1™ Synthetic 0W-20 offer significantly enhanced performance over conventional and semi-synthetic motor oils.

GulfTEC dexos1™ Synthetic 0W-20 is a full synthetic gasoline engine lubricant specially formulated to meet the requirements of General Motors dexos1™ specification. The new GulfTEC dexos1™ Synthetic 0W-20 is fully licensed and recommended for General Motors warranty requirements. The dexos1™ line of premium synthetic motor oils are designed to provide fuel economy benefits that arise from lower viscous drag, as well as greater seal compatibility to help ensure seal longevity.

More Information
Visit Gulf Lubricants for a detailed Product Introduction News Flash from Gulf Lubricants for GulfTEC dexos1™ Synthetic 0W-20, and more information about the line of Gulf Lubrication Technology products we supply, or contact us.

Star Cut® 4902 MB — EP-Fortified Light-Viscosity Tapping Fluid Reduces Friction At Chip Tool Interface; Increases Tool Life

Star Cut® 4902 MB, from Blue Star Lubrication Technology, is a high performance tapping fluid that has proven to bring our customers advantages over competitive products. The fluid’s performance coupled with its cost-efficiency differentiates Star Cut® 4902 MB from the competition.

Visit Our Blue Star Lubrication Technology PageStar Cut® 4902 MB is a light colored, EP-fortified light-viscosity tapping fluid fortified with extreme pressure additives, such as molybdenum, which are effective in reducing friction at the chip tool interface and promoting significant increases in tool life.

Star Cut® 4902 MB is designed to deliver extended tool life and superior surface finish. It is formulated with a unique blend of raw materials that promotes peak performance on more-difficult-to-machine metals, such as stainless steel and aerospace alloys.

Features and Benefits

  • Extreme Pressure Additives
    Extended tool life and reduced friction at the chip tool interface which results in material and tool cost savings.
     
  • Economical
    Oil stability and durability reduces product consumption which generates cost savings.
     
  • Improved Oxidation Stability
    Eliminates residues and extends oil life which results in product cost savings

Successful Conversions to Star Cut® 4902 MB

Manufacturer:

Commercial Mixers and Cookie/Sandwich Machines

Aerospace, Defense, Machine Tool, Automotive and Energy Industries

Automotive Components

Material:

Stainless Steel

Aerospace, Steel, Stainless

Aluminum, Steel, Stainless

Previous Tap Fluid

Castrol Molly Dee

Castrol Molly Dee

Houghton Threadkut 99

Reason for conversion

Equal performance, more economical

Equal performance, more economical

Increased tap life

 
To find out more about this exciting Blue Star product, contact Burke Petroleum today !

New GulfTEC dexos1™ Synthetic 0W-20 is Designed to Improve Fuel Economy and Meet General Motors Warranty Requirements

View Our Gulf Lubricants Product LineBurke Petroleum is pleased to announce the expansion of Gulf Lubricants’ line of synthetic motor oils with the addition of GulfTEC dexos 1™ Synthetic 0W-20.

GulfTEC dexos1™ Synthetic 0W-20 is a full synthetic gasoline engine lubricant specially formulated to meet the requirements of General Motors dexos1™ specification. The new GulfTEC dexos1™ Synthetic 0W-20 is fully licensed and recommended for General Motors warranty requirements. The dexos1™ line of premium synthetic motor oils are designed to provide fuel economy benefits that arise from lower viscous drag, as well as greater seal compatibility to help ensure seal longevity.

More Information
Visit Gulf Lubricants for a detailed Product Introduction News Flash from Gulf Lubricants for GulfTEC dexos1™ Synthetic 0W-20, and more information about the line of Gulf Lubrication Technology products we supply, or contact us.

Blue Cool S2685 Metalworking Fluid Provides Hard Water Stability and Improved Residue Characteristics

Blue Star’s Semi-Synthetic Coolant Can Replace Houghton’s Hocut® 795H

Blue Cool S2685 delivers enhanced cooling and wetting properties.Blue Star Lubrication Technology’s Blue Cool S2685 is a sulfur-free and chlorine-free semi-synthetic metalworking fluid for machining and grinding ferrous and non-ferrous alloys. It delivers enhanced cooling and wetting properties for extended tool life and superior surface finish.

Blue Cool S2685 is formulated with Blue Star’s unique blend of raw materials, which accounts for its outstanding cleanliness and bio-stability characteristics. It’s hard water stability and improved residue characteristics make it an excellent replacement for Houghton’s Hocut® 795H.

Product Characteristics

  • Versatile – can be used in a wide range of grinding applications
  • Multi-metal capable – suitable for use with ferrous and non-ferrous materials
  • Hard water stability – stable in a wide range of water conditions for increased sump life
  • Low foaming – reduces product loss through foam control; eliminates housekeeping and safety issues
  • Long sump life – excellent bio-resistance leading to excellent sump life and reduced waste volumes
  • Cleanliness – Greater detergency action results in cleaner machines and work pieces

Aerospace Applications

Blue Cool S2670 Can Replace Hocut® 795B (Boeing) and Hocut® 795 CU

Blue Cool S2670 is an enhanced version of Blue Cool S2685 designed specifically for the aerospace industry. Blue Cool S2670 has added inhibitors to prevent the staining of aerospace AL, as well as brass and copper. It is designed to compete favorably against Hocut® 795B (Boeing) and Hocut® 795 CU.

Related Artcile:

Blue Star Lubrication Technology Blue Cool® Coolants Boost Your Productivity & Enhance Your Work Environment